Electric height adjustable desk Instruction Manual - Manuals+ (2023)

Contents hide

1Electric height adjustable desk Instruction Manual

2Technical Specifications

3Parts

4Assembly Instructions

5Install the Lifting Column

6Install the Crossbar center rail

7Install the Tabletop and foot

8Install the Control Panel

9Install the cable Management tray

(Video) How To: SHW Electric Height Adjustable Desk Assembly

10Troubleshooting

10.1Protection and warning

11Attention

12Waste Disposal

13FAQS

14VIDEO

15Documents / Resources

16Related Posts

Electric height adjustable desk Instruction Manual

Electric height adjustable desk Instruction Manual - Manuals+ (1)

Electric height adjustable desk Instruction Manual

Technical Specifications

Height Range : 610CM-1260CM (without desktop) Base Width : 1000MM-1800MM Travel Speed : 32 per second (no load) Weight Capacity : Max 120KG Duty cycle : 10%. Max. 2 mins on, 18 mins off : Soft start/stop : Adjustable leveling studs : 4 Memory presets

Caution / Information

  • Make sure no obstacles are in the desk’s path.
  • Make sure the desktop is not touching any walls.
  • Make sure all cords are appropriate length to accommodate the change in height.

WARNING : Pinch Point Keep hands and fingers clear

(Video) Assembly Video of height adjustable desk

  • Keep children away from electric height-adjustable desks, control units and handsets. There is a risk of injury and electric shock
  • Keep all electrical components away from liquids.
  • Do not sit or stand on the desk frame. Do not crawl or lie under the desk frame.
  • Do not place any objects taller than 20” underneath the desk.
  • Do not open any of the components —the Legs, Control Box, or Switch. There is a danger of electric shock.
  • This product is designed with a duty cycle of 10%. (2 min. on, 18 min. off)

Use/Liability

  • This height adjustable desk has electric motors and is designed for use in dry work areas only.
  • The desk height is adjustable so that it can be positioned at the most ergonomically suitable height. Any other use is at user’s risk.
  • Under no circumstances does the manufacturer accept warranty claims or liability claims for damage caused from improper use or handling of the desk frame.

Important: Please read this manual carefully, if this desk is sold, please provide this manual to the buyer.

Parts

Electric height adjustable desk Instruction Manual - Manuals+ (2)Electric height adjustable desk Instruction Manual - Manuals+ (3)Electric height adjustable desk Instruction Manual - Manuals+ (4)

Assembly Instructions

Electric height adjustable desk Instruction Manual - Manuals+ (5) Lay out all components and tools to ensure that you have all included parts listed on the previous page. Fully separate the Crossbar Ends. You will find the Crossbar Center Rails inside.

Install the Lifting Column

  1. Insert one of the Lifting Columns into the Crossbar End. Use Allwn key 5x5mm thread 4pcs M6*10 Machine Screws into the holes as shown.
  2. Use Allen key 4x4mm, attach the side brackets(5) to the end of the supporting beam. then thread 2pcs M6*40 Machine screws.

Electric height adjustable desk Instruction Manual - Manuals+ (6) But do not tighten them all the way. Once all four screws are in place, tighten completely. Repeat Steps 2-3 for the remaining Lifting Column, Crossbar End, and Side Bracket.

Install the Crossbar center rail

Electric height adjustable desk Instruction Manual - Manuals+ (7)

Install the Tabletop and foot

Electric height adjustable desk Instruction Manual - Manuals+ (8)

Install the Control Panel

Electric height adjustable desk Instruction Manual - Manuals+ (9)

Install the cable Management tray

Electric height adjustable desk Instruction Manual - Manuals+ (10)Electric height adjustable desk Instruction Manual - Manuals+ (11)

Troubleshooting

Protection and warning

A. Block protection: when it displays “E02”, it alarms when desktop in vibration, collision and tilt, auto-clear the alarm after rebounding; or press any key to clear the alarm during rebounding. You should check and ensure that the desk won’t operate in large amplitude vibration,barrier or tilt condition, then try to run again. B. Overheat protection: when it displays “Hot”, this protection may be launched after running for a long time, you should wait for at least 18 minutes in order to use it again. C. Motor fault protection: when it displays “E10”, you should check and ensure that the connection between motor and controller is reliable, then power it off and power it on again or press reset to clear it. D. Overload protection: when it displays “E20”, you should remove some objects on the desktop when it occurs during the rise phase; or if it occurs during the decline phase, power it off and power it on again or press reset to clear it. E. Undervoltage protection: when it displays “E31”, it alarms when the supply voltage is lower than limit value, you should power it off and power it on again to clear it. Otherwise, it can be auto-cleared after it can be auto-cleared after. F. Overvoltage protection: when it displays “E32”, it alarms when the supply voltage is higher than limit value, you should power it off and power it on again to clear it. Otherwise, it can be auto-cleared after voltage goes to set value. G. Out-of-step protection : when it displays “E60”, you should check and make sure the motors of each channel are identical and their connection to controller is reliable, then press reset to clear it. Note: Only multi-motor system has out-of-step protection.

Attention

  1. Power supply: AC100V-240V,50/60Hz
  2. Service Environment 0-40°C
  3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet dishcloth when cleaning, be careful not to let the drops into the internal parts, not loose the connector.
  4. The electric box contains electronic components, metals, plastics, wires etc., so dispose of it in accordance with each country’s environmental legislation, not the general household waste.
  5. Check carefully to ensure correct and complete assembly before using.
  6. Be familiar with all functions and program settings of the product before first use.
  7. Children are forbidden to play on the product because of unforeseen action when playing, no any dangerous consequences caused by this improper action will not be on
  8. Slight noise caused by the V-ribbed belt or brake system due to structure will not have any effect on the use of the equipment
  9. Corrosive or abrasive materials am forbidden to clean the equipment. Must ensure that the cleaner used will not pollute the environment.
  10. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
  11. Cleaning and user maintenance shall not be made by children without supervision.
  12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
  13. Please make sure there is no hazard sources in your operating environment. e.g., do not litter the tools around. Always be careful to treat the packaging materials in order to avoid any possible danger, e.g. plastic bag may lead to choking hazard to children.
  14. Keep the original package of the equipment if necessary in case of the future use in transportation.

Waste Disposal

Electric height adjustable desk Instruction Manual - Manuals+ (12)This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable muse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Thanks for your attention!

FAQS

What is the difference between electric height-adjustable desk and mechanical height-adjustable desk?

Electric height-adjustable desk uses electric motor to adjust the height of the desk, which is more stable than mechanical height-adjustable desk.

What is the difference between electric height-adjustable desk and hydraulic height-adjustable desk?

Electric height-adjustable desk uses electric motor to adjust the height of the desk, which is more stable than hydraulic height-adjustable desk.

What is the difference between electric adjustable standing desk and hydraulic adjustable standing desks?

Electric adjustable standing desks use electric motor to adjust the height of the desk, which is more stable than hydraulic adjustable standing desks.

How do you get the desk to lock in the sitting position? It continues to slowly creep up the he standing position.

(Video) How To Reset Your Electric Standing Desk

Check the leaver , make it down to lock the position. Otherwise some issue with leaver

What is the lowest it will go to the floor? I’m short when I sit down and I have a child that would use it too.

The lowest is 28 1/2 inches. When looking at the picture of the item, you will see 6 boxes of little pics below the main image. When you click on the 6th image, the main image will display all the measurements.

Are the picture measurements correct/incorrect? If you look at the photos it shows the top being 19″ and side width as 23.5″, it looks opposite?

Pic shows 25.8 x 19, isn’t that right??

Do adjustable desks need to be plugged in?

Most motorized stand up desks require an outlet for electrical powerto raise and lower the work surface.

Are adjustable height desks worth it?

Standing desks are, without a doubt, over-hyped, and most of the supposed benefits simply aren’t true. While the science is still catching up, the existing research strongly points in the direction thatstanding desks simply aren’t worth the investment.

Do electric standing desks break easily?

Electric height-adjustable desks are notorious for breaking down— their motors burn out and their electrical wires break. Voltage issues can also cause the desk to simply stop working.

What are the adjustable desks called?

That’s where a height-adjustable standing desk (also known as asit-stand desk) comes in. You can quickly raise or lower your desk to alternate between sitting and standing throughout your workday, as our experts recommend.

How long do electric desks last?

Continuing with the approximation of a table enduring 780 cycles per year, all the tested RA Sit to Stand desks lasts a total of25.6 years.

Is pneumatic or electric desk better?

With fewer components than a motorized desk,a pneumatic system is simply more dependable. Though electric desk motors are known for motor burn-out and failures, pneumatic desks introduce no maintenance or malfunction.

(Video) Knoll Hipso Height-Adjustable Desk Assembly Instructions

Is a standing desk better than sitting?

Besides less sitting time, standing at work has other benefits:More calories burned: One study showed that standing sheds 88 calories an hour, compared to 80 calories for sitting. Walking burns a lot more — 210 calories an hour.

Are standing desks better for your back?

Although a standing desk might improve back pain, it’s likely not a cure-all. For example, a standing desk might help improve your posture and take the pressure off your neck and lower back; however, it’s not enough to correct more serious problems, such as scoliosis or a bulging disc.

VIDEO

Documents / Resources

Electric height Electric height adjustable desk [pdf] Instruction Manual
Electric height adjustable desk

Related Posts

  • Height Adjustable Computer Desk User Manual

    Height Adjustable Computer Desk User Manual Safety Instructions Children are not allowed to operate this product without sufficient…

  • Y-Desk Electric Height Adjustable Desk Frame User Guide

    Y-Desk Electric Height Adjustable Desk Frame User Guide Overview left leg 1pcs Right leg 1pcs Long tube 1pcs…

  • CAMILLE Writing Desk Instruction Manual

    CAMILLE Writing Desk Instruction Manual Instruction Manual QC-CODE (for service requests ) DISTRIBUTOR: BOPITA Energieweg 1, 6662…

  • V I V Crank Height Adjustable Desk Instruction Manual

    Crank Height Adjustable Desk Crank Height Adjustable Desk - Black Instruction Manual SKU: DESK-M55TB Scan the QR code…

    (Video) Desky Dual Sit Stand Desk Assembly Guide

FAQs

How do I manually reset my standing desk? ›

Unplug your desk from the outlet and wait 30 seconds. Then plug your desk back in. You should hear a few clicks. Press and hold the down button of your desk until the desk reaches its lowest point.

How do you program a height-adjustable desk? ›

That is why a growing number of people are opting to buy an adjustable height desk.
...
How to Program a Standing Desk: Programming Tips to Get Started
  1. Step 1: Raise or Lower the Desk to Your Preferred Height for Sitting. ...
  2. Step 2: Lock in Your Sitting Height Preset. ...
  3. Step 3: Repeat the Process to Get Your Standing Height Preset.
22 Jul 2022

How do I unlock my electrical desk? ›

How to Reset a Standing Desk
  1. Remove anything from under the desk that may obstruct travel.
  2. Unplug the desk from the power outlet and wait 30 seconds.
  3. Check all other cords for the desk's motor or control box and make sure they're secure.
  4. Plug the power cord into the wall socket.

Why is my adjustable base remote not working? ›

Check to make sure the batteries are installed correctly, or still have enough juice in them to function. Sometimes the issue is a faulty or old battery that prevents the remote from working. Don't forget, there is also the possibility that the child safety feature has been triggered by the remote.

Why is my adjustable base not working? ›

Check under the bed base to verify that the wired connections are secure and that there are no cords or bedding obstructing the movement of the base. Check to ensure the green LED light is illuminated on the control box. If there is no light, verify that the input and power cords are properly connected.

How do I factory reset my manual? ›

How to perform Factory Reset on Android smartphone?
  1. Tap Settings.
  2. Tap General & Backup and reset.
  3. Tap Factory data reset.
  4. Tap Reset device.
  5. Tap Delete all.
5 Oct 2022

How do you hard reset yourself? ›

10 Simple Ways To Reset Your Mind, Body, And Soul
  1. Drink lemon water first thing. ...
  2. Do a self-care power hour. ...
  3. Treat your skin. ...
  4. Get some fresh air. ...
  5. Declutter your digital life. ...
  6. Up your fruit and veggie intake. ...
  7. Try positive affirmations. ...
  8. Freshen up your desk space.
5 May 2016

How do you perform hard reset? ›

Using the volume buttons, scroll down to “Recovery,” then press the power button. If the only option in the menu is “No Command,” press and hold the power button, then press volume up. Either way, you'll end up in the reset menu. Here, use the volume down button to scroll to the “Wipe data/factory reset” option.

How do I set different desk presets? ›

Press and hold the DOWN button again until the LED display reads “RST”. Release the 1 button. Press the 1 button again until desired setting is reached. Once the chosen setting is displayed, release the button and wait for the display to return to “RST”.

How do I set the preset height on an autonomous desk? ›

Inputting preset desk heights into your SmartDesk's memory is super easy. Simply adjust the SmartDesk to your preferred height. Hold down the 'M' button until the numerical display starts blinking. Then select which number you would like to save that preset under.

How do you set presets on a uplift desk? ›

One-Touch: the preset button is briefly pressed and the base travels to the preset location. To switch between programs: l. Press and hold the DOWN button on the Keypad until the desk reaches its lowest height, then release the button.

What does loc mean on my standing desk? ›

Or is it showing the LOC Error code? If you are seeing this error code or your desk is failing to move, it means, likely, your Child Lock is on. To engage or disengage Child Lock, simply, press and hold the M button for about 5 seconds.

What does E08 mean on standing desk? ›

The E08 code indicates there is an issue with the connection between your control box and the motorized legs.

How do I fix an unresponsive remote? ›

Make sure none of the remote buttons are jammed or stuck. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control.

What do you do if your remote isn't working? ›

For Android TVs released in 2015 or later, symptoms may improve by updating the software of the remote control.
...
Reset the remote control.
  1. Open the battery compartment cover and remove the batteries.
  2. Press and hold the Power button for three seconds.
  3. Insert the batteries again and close the battery compartment cover.
13 Feb 2022

How do I know if my remote is not working? ›

Check if the IR Remote Control sends Infrared signals

Press and hold one of the buttons on the remote control. Look at the viewfinder or LCD screen. If the remote control sends a signal, you should see a light in the viewfinder or cellphone screen when you press buttons on the remote control.

How long do adjustable bases last? ›

If you buy a high-quality adjustable base and regularly service it, it should last for at least ten years. The best-quality adjustable bed frames get their durability from sturdy structural components made from steel and plastic.

What is the code for factory reset? ›

Phone factory reset
NokiaAndroidiPhone
Hard reset code press: *#7370# enter security code (default code :12345)Hard reset code : *2767*3855#Settings -> General -> Reset -> Erase All Content and Settings

What is the shortcut for factory reset? ›

Press and hold the Power button. While you hold Power, press the Volume Up button and let go of both buttons quickly. Android Recovery options should be displayed. With the volume buttons, scroll to "Wipe data/factory reset" and press the Power button.

Can you do a factory reset without delete everything? ›

Important: A factory reset erases all your data from your phone. If you're resetting to fix an issue, we recommend first trying other solutions. Learn how to troubleshoot Android issues.

How do you hit a reset button? ›

Basically, the idea is that instead of writing off a whole day as bad or hard or unchangeable because of a bad moment (or series of moments), you decide right then—right in the very heat of things—to push the reset button and start over.

What is hard and soft reset? ›

Soft Reset is simply powering your phone off and on by using power button - no data is lost. Hard Reset is forcibly stopping the power to phone by removing the battery ( if the battery is user replaceable)- no data is lost.

What is a hard power reset? ›

Generally, a hard reset is initiated by pressing a dedicated reset button, or holding a combination of buttons on some mobile devices. Devices may not have a dedicated Reset button, but have the user hold the power button to cut power, which the user can then turn the computer back on.

What is difference between reset and hard reset? ›

The two terms factory and hard reset are associated with settings. A factory reset relates to the rebooting of the entire system, while hard resets relates to the resetting of any hardware in the system.

Will I lose everything if I do a hard reset? ›

A factory reset removes all the files stored on your Android phone, including your data, and brings the condition of your device back to how it was when it left the factory. But if you follow these steps carefully, you can perform a factory reset your Android phone without losing your data.

What happens when you do a hard reset? ›

Android Factory Reset, for example, is a feature that erases all settings, user data, third-party applications, and associated application data from an Android device's internal flash memory.

What is the shortcut to change a desk? ›

Use desk keyboard shortcuts

Switch to a desk on left or right: Press Search + [ or ] (left or right square bracket). Switch to a specific desk: Press Shift + Search + [desk position number]. Move a window to a different desk: Press Shift + Search + [ or ]. Move a window to all desks: Press Shift + Search + a.

What is the shortcut to switch desks? ›

You can also quickly switch desktops without going into the Task View pane by using the keyboard shortcuts Windows Key + Ctrl + Left Arrow or Windows Key + Ctrl + Right Arrow.

What does ASR mean on my standing desk? ›

This code means the desk needs to be reset. Please take use the following instructions described below when the LED display shows ASR. Please press AND CONTINUE TO HOLD the “▼” button until the desk reaches its lowest height and rebounds to stop to reset.

How do I reset autonomous desk memory? ›

8. Resetting the Desk to Factory Setting. Press “M” until the symbol “FAC” appears. Press “S” to reset the desk and all its memory back to the factory setting.

How do I fix E07 error on standing desk? ›

E07 will display if the cable connected to the M1 port is not fully secured. Disconnect and reconnect the cable.

What does E04 mean on standing desk? ›

E04: This error code will show if the legs are overloaded. Apart from too much weight on the desk, or over the top of one leg it may also be caused if one or all legs are not 90 degrees to the frame.

What does LOC error mean? ›

The Loc Error code indicates that the Control Lock has been enabled. When the control is locked, the dryer will not start or operate. Some models will look like the following: Press and hold the Control Lock Key for 3 seconds to unlock the machine.

How do I fix error code E08? ›

If you put too many clothes in the drum and overload the machine it may result in error code E08 being displayed. Should this occur then reduce the load size by removing some of the garments in the drum and try again.

How do I reset my E08 standing desk? ›

If your desk displays error codes E07-E08, the desk is most likely uneven because of a communication error between the control box and the legs.
...
The reset procedure is as follows:
  1. Lower desk all the way to the bottom of its travel by holding the down key. ...
  2. Press and hold the down key again for around 7-10 seconds.
18 Aug 2021

How do I reset my ease adjustable base remote? ›

Unplug the Power Cord from your power outlet. Wait 1 minute, then plug the Power Cord back into your power outlet. Perform Step 2 within 10 seconds. Press and hold the PAIR button on the back of the remote.

Why is my autonomous desk not working? ›

Common Reasons Why Your Standing Desk Won't Go Down

The desk may be malfunctioning. There may be too much weight on it. An object may be obstructing travel. Your desk has lost power.

How do I reboot my remote? ›

For Android TVs released in 2015 or later, symptoms may improve by updating the software of the remote control.
...
Reset the remote control.
  1. Open the battery compartment cover and remove the batteries.
  2. Press and hold the Power button for three seconds.
  3. Insert the batteries again and close the battery compartment cover.
13 Feb 2022

How do you hard reset a remote? ›

Perform a “Hard” Reset

Instead of immediately replacing the batteries, leave the remote without batteries for 5-7 minutes and then put in batteries. Your remote will be returned to factory settings. This can also work even if you don't need new batteries and just remove and replace the same ones after waiting.

How do you reset the pressure switch after a power outage? ›

Check the Pressure Switch

Some pressure switches may need to be reset after a power outage. This is usually an easy task and all you need to do is turn the lever to “auto” and hold it until the pump turns on and the pressure gauge reads 30psi.

Why is my Tempurpedic adjustable base not working? ›

Check under the bed base to verify that the wired connections are secure and that there are no cords or bedding obstructing the movement of the base. Check to ensure the green LED light is illuminated on the control box. If there is no light, verify that the input and power cords are properly connected.

Why isn't my Tempur Pedic remote working? ›

Please ensure that remote(s) have fresh batteries. Unplug the base(s) for approximately 60 seconds. Plug the base(s) back into a power source.

How do you unfreeze a Tempurpedic remote? ›

Press and hold the FOOT UP and FOOT DOWN buttons together for approximately six (6) seconds. The remote backlight will flash twice. When the backlight goes away the remote is no longer in Child Lock. The remote and adjustable base will work normally.

How do I fix ASR error? ›

Reset ASR Error On Electric Standing Desks
  1. Hold the DOWN button for about 3 seconds and then release it.
  2. The electric desk will lower down on its own and returns to a height.
  3. The ASR error will disappear on the LED panel display.
13 Apr 2022

What does ASR mean on adjustable desk? ›

This code means the desk needs to be reset. Please take use the following instructions described below when the LED display shows ASR. Please press AND CONTINUE TO HOLD the “▼” button until the desk reaches its lowest height and rebounds to stop to reset.

Videos

1. How To: Flexispot Seiffen Standing Desk Assembly
(BTODtv)
2. DirectionDesk Complete Assembly Walkthrough & Tutorial (Standing Desk Install)
(Direction Desk)
3. My First Unboxing Video Jasper J Electric Desk | Amai Rawiri
(Amai Rawiri)
4. Mobile Sit & Stand Desk (Unboxing, Installation & Review)
(Original Video Reviews)
5. Vivo/EleTab Manual Crank Standing Desk: Unboxing, Assembly, and First Impressions
(Christopher Lum)
6. Standing Desk Assembly Instructions | Topsky Electric Standing Desk Step-by-Step
(Field Guide to DIY with Eddie Field)
Top Articles
Latest Posts
Article information

Author: Kieth Sipes

Last Updated: 02/23/2023

Views: 5433

Rating: 4.7 / 5 (67 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Kieth Sipes

Birthday: 2001-04-14

Address: Suite 492 62479 Champlin Loop, South Catrice, MS 57271

Phone: +9663362133320

Job: District Sales Analyst

Hobby: Digital arts, Dance, Ghost hunting, Worldbuilding, Kayaking, Table tennis, 3D printing

Introduction: My name is Kieth Sipes, I am a zany, rich, courageous, powerful, faithful, jolly, excited person who loves writing and wants to share my knowledge and understanding with you.